31
After the uniform icon changed to unlock, the
size of X was changed, the size ratio of Y and
Z remained unchanged, and the size was not
changed by itself.
Auto mirror:
mirror
Mirror in X direction
Mirror in Y direction
Mirror in Z direction
5.3
View model
See if the model size can be printed
The size or position of the model
exceeds the scope of the machine's
printing, so the model will appear gray, as
shown in the figure.
Modify the model size or move the
model location as required until the model
is all displayed in yellow.
View model overhang
Overhang usually exists in print model (you can see in Chapter 7),and the following ways
can be used to view overhang.
