35
3.3 Product description
Shell kit
The wall sleeve (Shell kit WRG 35 SR) is
inserted during the building phase in an
external wall along with the installation of the
external cover.
The empty ducting for the electric cabling is
also laid during this building phase.
The wall sleeve is protected by 2 plaster
protective covers.
Final assembly set
The fan unit is installed with the internal cover
and the electrical connection is made, after
the plastering and painting work is completed.
Fan units are standard units or units with
additional humidity control, for demand-driven
air extraction in the case of humidity.
Room air control
The ventilation unit is operated with a room air
control RLS 4-1 or RLS 5, depending on the
final assembly set.
The room air controls are available as surface-
or recess-mounted versions.
Networking several units
Up to 9 networked ventilation units can be
operated from one room air control.
If required, up to 4 room air controls
(4 operating locations) can be installed.
Different room air controls, RLS 4-1 and
RLS 5, should not be combined with each
other.
Combination options
WRG 35 SR shell kit
WRG 35-1-SE
Standard final
assembly set
WRG 35H-SE
Final assembly set
with humidity
control
Room air control
RLS 4-1 AP
RLS 4-1 UP
RLS 5 AP
RLS 5 UP
Room air control
RLS 5 AP
RLS 5 UP
GB
Summary of Contents for WRG 35
Page 6: ...6 D ...
Page 36: ...36 GB ...
