Maico MB 11 BERAphone Operation Manual Download Page 9

Page: 9 / 85

Operation Manual MB 11 BERAphone

/Classic

8100496 Rev. 6

23/10/2019

2 Warnings and Cautions

This section offers you important information about:

▪

how to read the operation manual

▪

where to spend special attention

▪

the customer responsibility

▪

the explanation of all regulatory symbols used

▪

important cautions and warnings that have to be considered during the
whole time handling and operating your device

Reading this Operation Manual

This operation manual contains information pertinent to the use of the MB 11 system
including safety information as well as maintenance and cleaning recommendations.

It is highly recommended that users read the manual in its entirety prior to use of the
MB 11 device on a patient.

READ THIS ENTIRE MANUAL BEFORE ATTEMPTING TO USE THIS
SYSTEM!

Use this device only as described in this manual.

All images and screenshots are only examples and may differ in
appearance from the actual device settings.

In this manual the following two labels identify potentially dangerous or destructive
conditions and procedures:

The WARNING label identifies conditions or practices that
may present danger to the patient and/or user.

The CAUTION label identifies conditions or practices that
could result in damage to the equipment

NOTE

: Notes help you identify areas of possible confusion and avoid potential problems

during system operation.

WARNING

CAUTION

Summary of Contents for MB 11 BERAphone






















































































Search results

Summary of Contents for MB 11 BERAphone

Reviews:

Brands by name

Popular brands

Maico MB 11 BERAphone, Operation Manual

Search results

Summary of Contents for MB 11 BERAphone

Reviews:

Brands by name

Popular brands