Operation Manual MB 11 BERAphone
®
/Classic
8100496 Rev. 6
67
23/10/2019
OPTION
INFORMATION
Print Mode
Select the type of printout you prefer as your default:
•
Label
: prints to a supported label printer.
•
List
: prints the results on a standard Windows printer with test
data in rows in a table layout. With this setting the user will
always be shown a list of all tests for the patient and must select
the tests to be printed.
•
Detailed:
prints the result details including the time graph
showing the progress toward a Pass over time as well as other
measurement information.
Results to
print
Choose your preference regarding which test results will be printed
by default when printing from start screen.
•
Best:
In this mode, the “best” result for both ears will print out
by default even if it is not the most current test. In other words,
the most recent
PASS
result will be printed for both ears. If
there is no
PASS
result, then the most recent Refer result will
print. Finally, if there are only aborted tests, then the most
recent
ABORTED
test will print.
•
Latest:
In this mode, the most recent result for both ears will
print out by default, with no regard to the result.
•
Selected:
In this mode, the
Printing measurements
dialog is
displayed so the user can select Individual tests for printing.
Printer
Settings
This control opens a standard Windows printer screen from within the
MB 11 software. For efficiency it is recommended that you set the
typical printer you will use to print your MB 11 results as the default
printer in the operating system settings. Make sure a label printer is
selected if the
Print Mode
setting is set to
Label
.
Header
Settings
This control opens the
Header Settings
dialog. This allows you to
Add
or
Delete
a logo and enter
Address Information
for the header, which will
display on the
List
and
Detailed
print format. A logo file can be selected
in a browser after selecting the
Add
button. The logo will display on the
upper right corner of the printout. Use the control
Delete
to remove the
selected logo. The text area
Address Information
permits input of
multiple rows of text each with a maximum of 50 characters. It will be fixed
in place on the top left side of the printout (Figure 57).
Figure 57
Summary of Contents for MB 11 BERAphone
Page 1: ...Operation Manual MB 11 BERAphone Classic ...
Page 2: ......
