EN | 18 | ACX120/220 | Setup
© MAHLE
9
Setup
From the SETUP menu it is possible to
select parameters and activations before
starting cycle:
ELECTRIC COMPRESSOR FUNCTION
by selecting this entry, one may
change the type of Oil to charge into
the A/C system. Attention: the
HYBRID KIT PRO (optional
accessory) is required in order to run
this function
E³ CONNECT
by selecting this entry, you can
enable the E³ CONNECT function.
CHARGE MODE
by selecting this entry, one may
decide whether to enable use of the
Quick Mode or Zero Tolerance
charge method
OIL CHARGE MODE
by selecting this entry, one may
decide the oil charge mode during
the charge cycle.
o
Automatic: during the
charge cycle, the user will
be prompted to enter the
quantity of oil to be charge
(ml) as well as the oil type,
PAG ( ISO-46/100/150) or
POE.
o
Manual: During the charge
cycle, the user will be
prompted to select YES in
case he wants to proceed
with the oil manual charge
before the refrigerant charge
phase, or NO in case he
doesn’t want to charge oil
during the charge cycle.
A/C PERFORMANCE TEST
by selecting this entry, one can
enable or disable the pressure check.
AIR PURGE SYSTEM
by selecting this entry, one can
enable or disable the AIR PURGE
SYSTEM function. If enabled, on a
weekly basis, the station, when
switched on, will suggest the user to
run the procedure. If disabled,
execution of the procedure will no
longer be suggested.
REFRIGERANT CLEAN
by selecting this entry, one may
decide whether or not to enable the
refrigerant clean function, which
enables an additional recycling,
within the station itself, started in
automatic when it is switched on but
not in use. This function ensures a
higher level of purity of the recycled
refrigerant to the advantage of the
service quality.
RECOVERED REFRIGERANT AND OIL
PRINTING (ONLY WHEN PRINTER IS
INSTALLED)
selecting this entry, you can choose
whether you want to enable
displaying and printing of the
recovered refrigerant quantity.
Setting available only with printer
installed.
REPORT SAVING MODE
by selecting this entry, you can save
the reports of the performed charges
(automatic cycle or Reg. 842/2006).
