MAGUIRE Weigh Scale Blender, Installation Operation & Maintenance

Page: 32 / 141

M A G U I R E P R O D U C T S , I N C .
32
W E I G H S C A L E B L E N D E R

KEYSTROKE SEQUENCE for these or other SPECIAL FEATURES
Making Changes to Parameters - Keypad Sequence:
Switch the STOP END OF CYCLE switch DOWN :
Turn
POWER ON . Wait 5 seconds, until display says WAITING
Press
Display will say: ENTER PASSWORD
Press
Display will say: PROGRAM
This is the Program Mode
To alter a PARAMETER:
Press
Press repeatedly until the parameter you want is displayed.
If you accidentally pass it, use the * key to back up. With
the proper parameter displayed, enter the NEW number.
Enter 5 digits; use leading zeros if necessary. For correct
entries, follow specific directions given in the PARAMETER
section.
Press Display will say: PROGRAM
Press Display will say: SAVE USER SETTINGS
This saves the changes made
Press Display will say: WAITING when settings are complete.
Making Changes to Functions - Keypad Sequence:
Press Display will say: ENTER PASSWORD
Press Display will say: PROGRAM
This is the PROGRAM MODE
Press Display will say: INSTRUCTION [ _ _ ]
Press XX (2-digit code) Enter the 2-digit code. For correct entries, follow specific
directions given in the KEYPAD section, STAR
FUNCTIONS.
Press Display will say: PROGRAM
Press Display will say: SAVE USER SETTINGS
This saves the changes made
Press Display will say: WAITING when settings are complete.
Toggle forward through the component parameters by continuing to press the SET key.
Press the VIEW key to move backwards through the component parameters.