MAGUIRE Weigh Scale Blender, Installation Operation & Maintenance

Page: 13 / 141

M A G U I R E P R O D U C T S , I N C .
13
W E I G H S C A L E B L E N D E R

Controller Parts Key
1. Front Panel
1.1 Keypad
1.2 Service Handle
1.3 Main Display
1.4 Alarm Beacon
1.5 Materials Thumbwheels
1.6 Fuses
1.7 Power Cord
1.8 On / Off Switch
1.9 Outputs for additional Feeders
( NOTE
– Feeder Outputs – These 2 outputs are not available on WSB MB and WSB 100
Series Blenders.)
1.10 Options - High Sensor Mount or Remote Alarm Output
1.11 Air Solenoid Connection
1.12 Optional
– Low Sensor Mount
2. Left Side Panel
2.1 Stop End of Cycle / Continue Switch
2.2 Computer Serial Connection
2.3 USB Port for Flash Drive (software updates, reports to text files)
2.4 Load Cell Port Input
2.5 Optional
– Extrusion Control 2 Way Interface
2.6 Immediate Pause / Continue Switch
2.7 Ethernet Port (RJ-45)
3. Right Side Panel
3.1 Silence Alarm Press Down Button
3.2 Electrical Mix Motor Operation Switch
– Timed (Default), On or Off
3.3 Electrical Mixer Output Fuse
3.4 Electrical Mix Motor Power Plug
(
NOTE
– Mixing Controls – These 3 features not available on WSB MB and WSB 100
Series Blenders
– fitted instead with Pneumatic Mixers.)
3.5 Mix Chamber Level Sensor Input
3.6 Audible Alarm Loudspeaker