Maguire Products, Inc.
Rev. June 11, 2020
– ULTRA-600 Touchscreen
64
ULTRA By Maguire
- Ultra Low Energy Dryer
Cleanout of the Retention Hopper
The Retention Hopper will slide out for easy access. Prior to sliding out the Retention Hopper
remove all material. Sliding out the Retention Hopper will open the bottom drain of the hopper.
To slide the Retention Hopper out,
the sealing collar needs to be
dropped. It is held up using a
series of magnets. Grab the red
handles and pull downward.
Locate the black lift handle and
raise the Retention Hopper by
rotating the lift handle up and
towards the front of the Dryer.
With the lift handle raised, use the
red handle to slide the Retention
Hopper out towards the front of the
Dryer.
When cleanout is complete, slide the Retention Hopper
back into the Dryer, then lower the Retention Hopper using
the black lift handle. Finally lift up on the retention hopper
sealing collar.
