Maguire Products, Inc.
Rev. June 11, 2020
– ULTRA-600 Touchscreen
62
ULTRA By Maguire
- Ultra Low Energy Dryer
Emptying the Vacuum Chamber
The Vacuum Chamber is non-removable. The Vacuum Chamber has a front facing cleanout
hatch. Prior to opening the front access hatch, removal of all material is recommended.
IMPORTANT: During the Clean Out, keep hands and tools clear of all valves. DO NOT reach
into machine during Clean Out.
Press
The Clean Out button is located on the Home Screen.
Display will show: Batch Start Clean Out Mode screen.
Both the Dump Heating Hopper button and the Heating Hopper
Drain Valve button (located near the upper rear of the Vacuum
Chamber area) can be used to empty the Heating Hopper.
Press
status window will appear.
Press
to return to the Home Screen.
Clean Out / Dump All
– Dump All opens all valves allowing material to flow freely through the
dryer. Material in the Heating Hopper will pass into the Vacuum Chamber and then pass into
the Retention Hopper. In this mode, it is possible to empty the entire dryer using a conveying
system pulling from the material outlet at the base of the dryer.
IMPORTANT: During the Clean Out, keep hands and tools clear of all valves. DO NOT reach
into machine during Clean Out.
Press
The Clean Out button is located on the Home Screen.
Display will show: Batch Start Clean Out Mode screen.
Both the Dump Heating Hopper button and the Heating Hopper
Drain Valve button (located near the upper rear of the Vacuum
Chamber area) can be used to empty the Heating Hopper.
Press
Confirmation window will appear.
Press
to start the Clean Out.
Press
to return to the Home Screen.
