Maguire Products, Inc.
Rev. June 11, 2020
– ULTRA-600 Touchscreen
85
ULTRA By Maguire
- Ultra Low Energy Dryer
Receiver Assignment
NOTE: If you are already entered into SETUP, skip the password step and go to the
below.
On the HOME
screen PRESS:
Pressing the SETUP button prompts for a password.
PRESS:
22222
Enter the password (default password is 22222)
Press
to confirm password.
This enters the Setup screen. This screen contains several setup specific options.
PRESS:
Press the large Receivers button to enter the Receiver assignment
screen.
The gray screen contains any previously assigned Receivers. For first time setup, this screen is probably blank and no Receivers have
been assigned.
Turn on your Flexbus Receivers in the order that you want then to be assigned.
Your receivers will appear on the screen and be numbered in the order that
they were turned on.
If necessary, pressing each receiver icon will allow you to re-assign the ID
number to a different unassigned number.
Pump
symbol in the pump panel to toggle the Pump online or offline.
PRESS:
To return to the Setup screen.
When you return to
the Setup screen, the Receivers button will show the
Setup symbol on the pumps button indicating that you
are still in the Receiver Assignment mode.
PRESS:
To Exit the Receiver Assignment Mode
. Setup icon
will disappear indicating you are out of Receiver
assignment mode.
PRESS:
To exit the Setup screen.