Maguire Products, Inc.
Rev. June 11, 2020
– ULTRA-600 Touchscreen
45
ULTRA By Maguire
- Ultra Low Energy Dryer
L1A - Loader #1 Alarm
format:
xxxxx (counts)
function(s):
Number of failed load attempts after which a Loader #1 alarm is triggered.
Note:
Loader #1 must be set to “Internal” mode for this parameter to have
effect.
L2T - Loader #2 Timings
format:
xxyyy (seconds / seconds)
function(s):
xx:
Loader #2 ON time
yyy:
Loader #2 OFF time.
Note:
Loader #2 must be set to “Internal” mode for this parameter to have effect.
L2A - Loader #2 Alarm
format:
xxxxx (counts)
function(s):
Number of failed load attempts after which a Loader #2 alarm is triggered.
Note:
Loader #2 must be set to “Internal” mode for this parameter to have
effect.
L2D - Loader #2 Delay Time
format:
xxxxx (seconds)
function(s):
The amount of time, after a vacuum chamber dump, between weight being sensed in the
retention hopper and loader #2 turning on. A delay here ensures that material is not
being conveyed away during the dump, which could cause throughput and totalizer
reading inaccuracies.
PMC - Progressively Metered Cycles
format:
xxyyy
(counts / percentage)
function(s):
xx:
Number of cycles to meter for initial rate adjustments.
yyy:
Percentage of threshold weight to target during initial metered cycles.