MAGUIRE Gravimetric Gateway LineMaster, Installation Operation & Maintenance

Page: 22 / 93

Maguire Products, Inc.
22
LineMaster

Install LIW Controller
Unpack the LIW controller and hang the controller box to the
Controller Mount plate located on the side of the LIW frame.
Have the controller using the protruding screw heads on the
back of the controller and the notches on the mount plate. The
controller can be secured in place using one ¼-20 x ¾ screw
and threading it through the back of the mount plate and into the
back panel of the controller. On LIW 5 models, the mount plate
is part of the frame.
Connect Cables
Two cables are supplied with the LIW Hopper. Connect the 3 foot DB25
cable to the Controller’s Load Cell port and the LIW Loadcell port located
on the LIW frame. On LIW 5 models, this cable is attached to the LIW
frame and should be connected to the controller’s Load Cell port.
Connect the 3 foot 4-Pin Amp cable to the Fill Valve on the Controller and
the LIW Valve on the frame.
Connect Air Line
Connect a clean, oil-free, regulated 80 psi (5.5 bar) air line to the Air
Solenoid’s Nylon Quick Connect using a 5/32 nylon airline.