MAGUIRE Gravimetric Gateway LineMaster, Installation Operation & Maintenance

Page: 19 / 93

Maguire Products, Inc.
19
LineMaster

LineMaster
TM
Kits
Depending on the application your kit may include the following:
o
Extrusion Control – LineMaster Controller, Extruder Speed Control Interface, Cabling
and strain relief.
o
Yield-X - LineMaster Controller, Extruder Speed Control Interface, Cabling, cable strain
relief, mounting hardware, 24 Volt Power Supply, Encoder, Encoder Wheel (12 inch
circumference), Encoder Cable.
o
Yield T - LineMaster Controller, Take-off Speed Control Interface, Cabling, cable strain
relief, mounting hardware, 24 Volt Power Supply, Encoder, Encoder Wheel (12 inch
circumference), Encoder Cable.
o
Yield D - LineMaster Controller, Extruder Speed Control Interface, Take-off Speed
Control Interface, Cabling, cable strain relief (2), mounting hardware, 24 Volt Power
Supply, Encoder, Encoder Wheel (12 inch circumference), Encoder Cable. Requires
the G2 software and dedicated computer system. G2 Not included with kit but may be
provided separately.
Additional Options
o
LineMaster 12 Software Controller – Up to 12 components, controlling a blender and a
LIW hopper (Loss-In-Weight hopper).
o
LIW Stand Alone LineMaster Controller – Controls a single LIW hopper (Loss-In-Weight
hopper) tracking throughput of the LIW.