MAGUIRE Gravimetric Gateway LineMaster, Installation Operation & Maintenance

Page: 60 / 93

Maguire Products, Inc.
60
LineMaster

a given material in the Specific Gravity field. Click
Add/Update to save changes to a material.
Once a Specific Gravity has been entered for all lines,
the actual percent per layer will be displayed.
If the actual is not the correct percent that you will be
running, a target can be entered. Once all layers are
locked, the actual percent will be adjusted to meet the
target. To adjust the target percent, click any of the
layer’s Target % fields to display the Target Percent
box. Enter the new percent (must total 100%) then click
Close and Download All Percentages . Locking all
layers will apply the new percentages.
In the upper-right of the Yield screen, the Calculated
Yield Box requires information to be entered. Overall
Specific Gravity is displayed at the top of this box and is
calculated from the layers by their percent.
You will need to enter the Width and gauge of the
product. To do this, click the Width box to display a
keypad. Enter the Width, of your product, then click OK.
To set the gauge, click the Gauge box to display a
keypad. Enter the Gauge of your product, then click
OK.
Once these values are entered, a
Calculated Yield will
display.
After all layers are in the lock position, Total Throughput
will be locked. This will be indicated by the
Total
Throughput field turning green.
Also the Calculated Yield will be sent below to the
Target Yield field. The Actual Yield will be adjusted to
meet the target yield value in order to maintain the
entered gauge.
It’s Rolling Rock Time.