MAGSTIM NEUROSIGN V4, User Manual

Page: 17 / 86

The Magstim Company Ltd.
©
17
NOP08-EN-10
Screen Tilt
Adjust
17.
Ethernet Socket 16.
Mute Sensor Socket 15.
Display Connection (a) 14.
Slave Screen Connection 13.
Pre-Amplifier
Connection
12.
Trigger
Output
11.
Trigger
Input
10.
Power
Switch
20.
Power
Input
19.
Display
Connection (b)
(14.)
Equipotential
Point
18.
1.4 Rear View
10. Trigger Input
Connect an external stimulator trigger
to this connector. This requires a TTL 5V
pulse.
11. Trigger Output
The output is a TTL 5V signal at the
same frequency as the stimulator.
12. Pre-Amplifier Connection
Connection socket for the pre-amplifier
lead.
13. Slave Screen Connection
For more information contact the
product enquiries team (page ii).
14. Display Connection
(a) Touch Screen DCU
(b) Mains unit
The connection between the touch
screen DCU and the mains unit via the
UI cable.
15. Mute Sensor Socket
Connection socket for the mute sensor
lead.
16. Ethernet Socket
For more information contact the
product enquiries team (page ii).
17. Screen Tilt Adjust
See "4.3 Adjusting The Screen Tilt" on
page 41 for information.
18. Equipotential Point
See "a. Electrical Testing" on page 77
19. Power Input
Connection socket for the AC mains
power lead provided with the nerve
monitor.
20. Power Switch
The switch to turn the nerve monitor
ON and OFF.