MAGSTIM NEUROSIGN V4, User Manual

Page: 46 / 86

The Magstim Company Ltd.
©
46
NOP08-EN-10
i. Channel Windows
There is a window for each active channel.
1. Channel Number & Label
2. Channel Volume
4. Waveform
Peak
Amplitude
3.
Timebase
Scale
5.
X Axis
(Timebase)
6.
Waveform
Scale
7.
Y Axis
(Amplitude)
8.
Amplitude
Bargraph
9.
1. Channel Number & Label
The channel number and label are
shown in the top left of each channel
window.
2. Channel Volume
The channel volume (%) is shown in
the top right of each channel window.
You can change the individual channel
volume by pressing here.
If set to 0%, will be displayed to
indicate the channel is muted.
3. Peak Amplitude
The peak amplitude of the displayed
waveform.
4. Waveform
The displayed signal which has
exceeded the waveform threshold.
5. Timebase Scale
The set scale of time currently displayed
on the screen (X axis).
To adjust the scale press
in the
monitoring menu, then press + or - to
adjust the timebase scale
.
6. X Axis (Timebase)
The timebase is shown along the X
axis. The set timebase can be seen on
the timebase scale ( 5 )
7. Waveform Scale
The set waveform (amplitude) scale.
This scale alters the sensitivity of the
waveform display. Increasing the scale
reduces the visible amplitude of the
waveform.
Press the + or - to adjust the scale.
8. Y Axis (Amplitude)
The Y axis shows the amplitude. The
set amplitude can be seen on the
waveform scale ( 7 )
9. Amplitude Bargraph
A bargraph representation of the
amplitude. The top (coloured) segment
remains lit for a period of time which
can be defined in "b. System Settings"
on page 62.
Figure 4.4. Single Channel Window