![background image](http://html1.mh-extra.com/html/magnetek/electrobar-fs/electrobar-fs_instruction-manual_3572977021.webp)
Electrification FS Conductor Bar System Instruction Manual
October 2019
Page
21
of
34
6.2.(e):
Push joint cover down until lower lips of cover clear the bottom of the line element. If
cover does not clear bottom of line element, verify the cover is centered between joint assembly
bolts.
6.2.(f):
Push on sides of joint cover so lips are positioned under the line elements.
6.2.(g):
Pull up on the joint cover so the lips are in contact with bottom of the line element cover
and insulate the vertical face of the exposed conductor bar.
6.2.(h):
Fold down flaps at each end of the joint cover.
6.2.(i):
Fold the locking tabs around the side of the joint cover and snap them into the slots along
the side of the joint cover.