8
MAG-8200 LAWNMOWER BLADE SHARPENER
ASSEMBLY
MOUNTING AND CHANGING GRINDING WHEELS
1. Be sure the MAG-8200 power cord is unplugged.
2.
Use the two catch clamps to remove the black front cover.
3. Locate your spanner wrench and arbor wrench (both supplied by Magna-Matic.)
4.
The arbor wrench fits into a square notch in the arbor behind the grinding wheel
5.
The spanner wrench fits into the two holes in the arbor nut.
6. ARBOR HAS LEFT-HANDED THREADS.
Always inspect grinding wheels for possible damage - never mount a cracked grinding wheel.
DO NOT OVER-TIGHTEN ARBOR NUT - ONLY LIGHT PRESSURE TO TIGHTEN.
The motor will tighten the arbor nut every time the sharpener is turned on.
For optimum performance use only grinding wheels specified by Magna-Matic. All NORTON®
brand grinding wheels sold by Magna-Matic are speed tested for 5500 RPM
NOTE: ARBOR HAS LEFT-HANDED THREADS.
MAG-8200 OEM 1” WHEEL = 9000-35
MAG-8200M OEM 1/2” WHEEL = 8000-30
MAG-8200B OEM 2” ABRASIVE BELT = 8200-215
Purchase replacement grinding wheels & belts at:
https://www.magna-matic-direct.com/grinding-wheels/
STRAIGHT FLAT
CUTTING EDGES
CURVED / WAVY
CUTTING EDGES
HOW TO CHOOSE THE CORRECT GRINDING WHEEL FOR THE BLADE
The 1” wide grinding wheel or 2” wide abrasive belt is used for conventional lawn mower blades with straight flat cutting
edges. When you mount the 1” wheel use only the arbor nut. Do not use the arbor spacer with the 1” wide wheel.
This 1/2” wide grinding wheel is required to sharpen curved/wavy cutting edge mulching blade. The arbor spacer (8000-27)
is necessary to mount a 1/2” wide grinding wheel.
Scan Here to buy
abrasives
