28
MAG-8200 LAWNMOWER BLADE SHARPENER
ABRASIVE BELT
REPLACEMENT
Be sure the MAG-8200 power cord is unplugged. Remove the front steel grinding wheel cover
by releasing the two catch clamps on each side of the grinding cavity. Use the crank handle to
raise up the contact wheel. The idler pulley will get closer to the contact wheel as you turn the
crank handle. This will take the tension off the abrasive belt and allow it to slide off easily.
Always inspect abrasive belt for possible damage - never mount a
torn belt or one with a com-
promised seam.
Before turning on the sharpener check the belt tracking by hand. Do this by rotating the contact
wheel clockwise by hand. Scan the QR code to see the video.
Tracking adjustment - adjust tracking with supplied T-handle wrench.
•
Clockwise rotation will track the belt away from you.
• Counter-clockwise rotation will track the belt towards you.
MAKE VERY SMALL ADJUSTMENTS TO TRACKING - IT IS VERY SENSITIVE.
A SMALL ROTATION WILL MOVE THE BELT QUITE A BIT.
WATCH THE VIDEO FOR GUIDANCE, IF YOU ARE UNFAMILIAR WITH BELT
GRINDERS. Scan the QR code for videos.
OEM ABRASIVE BELT 2” wide = 8200-215
CAUTION
TURN OFF
AND UNPLUG
BEFORE SERVICING!
