10
MAG-8200 LAWNMOWER BLADE SHARPENER
Call with any questions!
800-328-1110
IMPORTANT STAND NOTE:
The MAG-8200 Series mounts in the
same orientation as the MAG-8000. So
when you follow your MAG-10400 Stand
instructions “STEP 7”.
The yellow base of the MAG-8200 is not
threaded so the mounting to the stand is
with a through bolt 1/4”.
The 10400-04 balancer arm base is a
little longer now for the new
MAG-8200 series.
IMPORTANT DUST COLLECTOR
NOTE:
The MAG-8200 Series mounts needs the
MAG-200 Dust Collector
mounted under the grit guard.
It is mounted on the opposite side that it
was for the MAG-8000.
For the MAG-8200 we have moved up to
a 4” diameter grit guard inlet and 4” di-
ameter yellow spiral hose. This increases
the air flow up 400 CFM from 250 CFM.
The table top orientation for the MAG-10400 stand for all MAG-8000,
MAG-8100, and MAG-8200 Sharpeners. This is covered in Step 7 of the
stand instruction sheet.
Use two 1/4-20 x 2” long hex bolts with 1/4
nuts to directly mount the MAG-8100 or
MAG-8200 directly to the stand table top.
For mounting water-cooled units, follow the
water-cooled mounting instructions.
