26
MAG-8200 LAWNMOWER BLADE SHARPENER
Loosen
Tighten
GRINDING WHEEL
REPLACEMENT
Be sure the MAG-8200 power cord is unplugged. Remove the front steel grinding wheel cover
by releasing the two catch clamps on each side of the grinding wheel cavity. Locate your span
-
ner wrench and arbor wrench (both supplied by Magna-Matic.) The arbor wrench fits into a
square notch in the arbor behind the grinding wheel, and the spanner wrench fits into the two
holes in the arbor nut. See diagrams below, or scan the QR code to watch a video.
Always inspect grinding wheels for possible damage - never mount a cracked grinding wheel.
DO NOT OVER-TIGHTEN ARBOR NUT - ONLY LIGHT PRESSURE TO TIGHTEN.
The motor will tighten the arbor nut every time the sharpener is turned on.
For optimum performance use only grinding wheels specified by Magna-Matic. All NORTON®
brand grinding wheels sold by Magna-Matic are speed tested for 5500 RPM
NOTE: ARBOR HAS LEFT-HANDED THREADS.
OEM WHEEL 1” WIDE = 9000-35
OEM WHEEL 1/2” WIDE = 8000-30
OEM ABRASIVE BELT 2” wide = 8200-215
CAUTION
TURN OFF
AND UNPLUG
BEFORE SERVICING!
