19
CHANGING TABLE INSERTS
IMPORTANT:
You will only need about a 1/4 turn to loosen or tighten.
1.
Use the supplied 3/16” hex T-handle wrench to loosen the vise.
2.
Remove the current table seated in the framework.
3.
Notice how the steel insert plate fits into the framework of the two aluminum arms of the modular
worktable.
4.
Place the table into the framework.
5.
Push the table towards the grinding wheel so you are squarely seated in the stops in the framework
(see red highlighted area)
6.
Tighten vise jaw with the T-handle wrench.
