20
MAG-8200 LAWNMOWER BLADE SHARPENER
How to Set the four possible angle settings.
•
30
° bring table to top setting, level with first half-circle.
•
35° lower table to second half-circle
•
40° lower table to third half-circle
•
45° push table so it bottoms out as low as it will go.
•
Lastly lower the grinding wheel via the crank handle on top
of the sharpener. Leave approx. 1/32” of space between the
wheel and table. Do not grind into the table.
CHANGING ANGLES
IMPORTANT:
You will only need about a 1/4 turn to loosen or tighten.
The modular worktable system can be set to 4 angle settings.
30 / 35 / 40 / 45 degree cutting edge angles
As an example these instructions will set the sharpener for 35 degrees:
1.
Use the T-handle wrench to loosen the angle adjustment bolt, but leave light tension on the bolt, so
the arms stay in-place but still move.
2.
Insert the T-handle wrench into the (second from the top) half-circle shape, this provides a stop.
3.
Push down on the worktable arms until they hit the t-handle.
4.
Pull the T-handle out and tighten the adjustment bolt.
5.
Lower the grinding wheel via the crank handle on top of the sharpener.
6.
Bring the wheel down within approx. 1/32” of the table.
7.
The sharpener is ready to grind 35 degrees.
35°
35°
Loosen to remove table
Loosen to change angle
