EN
www.magmaweld.com
ID 250TW DC
11
USER MANUAL | KULLANIM KILAVUZU
TECHNICAL INFORMATION
1.1 General Information
Figure 1: ID 250 TW DC
1-
Line Cable Inlet
9-
Hot Water Input (Red)
2-
Power Switch
10-
Water Tank
3-
Remote Connection Input (Ops.)
11-
Earth Cable and Welding Cable Socket (+)
4-
Gas Input
12-
Earth Cable and Welding Cable Socket (-)
5-
Gas Output
13-
Control Panel
6-
Torch Control Connections
14-
Parameter Adjustment Knob
7-
Pedal Control Connections
15-
Torch Strap
8-
Cold Water Output (Blue)
1.2 Machine Components
ID 250TW DC is an inverter type portable, mono-phase DC TIG-MMA welding machine designed for TIG welding of all kinds of thin metal sheets except
aluminum & for MMA welding of all kinds of stick electrodes up to 5 mm.
Enhanced professional TIG controls such as, HF start, Touch-Lift, Pre-Gas, Up-Slope, Down-Slope, Post-Gas & Crater filling are present. Up to 10 complete
jobs can be stored in the memory and run when it is necessary. Current, time and program settings can easily be monitored by digital displays.
You can work with generator-sets by supplying the appropriate input power and frequency. ID 250TW DC can also be used with long welding cables up
to 25 mt. The machine is fan cooled and thermally protected against over heating.
Technical Information
