ID 250TW DC
EN
www.magmaweld.com
12
USER MANUAL | KULLANIM KILAVUZU
1.3 Product Label
As defined in the standard EN 60974-1, the operating cycle rate includes a time period of 10 minutes. For example, if a machine specified as 250A
at %60 is to be operated at 250A, the machine can weld without interruption in the firs 6 minutes of the 10 minute period(zone 1). However, the
following 4 minutes should be kept idle for the machine cool down (zone 2).
Suitable for operation at hazardous
environments
X
Duty Cycle
U0
Input Current
I2
Open Circuit Voltage
U1
Rated Welding Current
IP21S
Line Voltage and Frequency
U2
Protection Class
Input Power
S1
Rated Welding Voltage
I1
Three Phase Transformer Rectifier
TIG Welding
Descending Characteristic
Direct Current
Manual Metal Arc Welding
Mains Input-3 Phase Alternating Current
Technical Information