EN
www.magmaweld.com
ID 250TW DC
17
USER MANUAL | KULLANIM KILAVUZU
Multifunctional Knob
İs used for selecting and adjusting welding paramerters. To select a parameter, press the button and observe that
the corresponding LED lights. Clockwise and counter clockwise turning of the knob, increases and decreases the
value respectively. To store the value, press the button.
1
2
3
4
5
9
Multifunctional Display
Displays the value of the welding parameter which is selected by multifunctional knob. Plus it displays the welding
current value during welding.
Program Selection Button
İs for selecting the desired program.
Welding Mode Selection Button
İs for selecting MMA, HF Start TIG and Touch-Lift TIG modes.
When MMA mode is selected, its
LED 6
lights.
When Touch-Lift TIG mode is selected, its
LED 7
lights. In this mode, arc starts after touching the tungsten electrode
to the work-piece and lifting the electrode.
When HF Smart TIG mode is selected, its
LED 8
lights. In this mode, arc starts via ignition through the gas without
any torch touching to the work-piece.
Program Display
Displays the number of the selected program.
2 Stroke - 4 Stroke - Spot Welding Selection Button
İs for selecting;
2 stroke, 4 stroke and Spot Welding Modes
When 2 Stroge TIG is selected, its
LED 10
lights.
When 4 Stroge TIG is selected, its
LED 11
lights.
When Spot Welding is selected, its
LED 12
lights.
3.1 User Interface
OPERATION
Operation
