46
4. Control
By pressing any button, on the remote control display will appear an antenna symbol
If the
signal has been accepted and processed, there will appear a sign
.
4.1. Arming
Arming, locking, and turning blocking of the engine on.
Press button
shortly.
Remote will beep 1x and an icon
will appear on display.
Siren beeps 1x and lights will flash 1x.
Alarm will be armed and the car will be locked.
LED on RPS sensor will begin to flash
Shock sensor will be activated after 15 sec. While armed, the engine blocking system
against starting attempt is activated. At the same time, if this is on, RPS will be activated
as well.
ATTENTION !
If your hazard lights are on and you will arm the car, it may cause warning on remote !
If, when activating alarm, there are some doors opened, siren will beep 3x, lights will
flash 3x, remote beeps 3x and the door symbol on display will be flashing. Alarm will not turn on! If,
when turning alarm on, some doors are opened, alarm will not turn on, but if you have activated function
of door line delay, alarm will go on no matter if the doors are open or closed.
When leaving your parking lights on after stepping out of the car, you will be made aware
of it by beeping of the remote.
4.2. Disarming
Disarming, unlocking, and turning blocking of the engine off.
Press button
shortly.
Siren will beep 2x and the lights will flash 2x.
Remote will beep 2x and icon
will appear on display.
Alarm will be on and the car will be unlocked. Start blocking will
be off as well as RPS.
You can turn acoustic signal off when arming/disarming, if you wish to (page 52)
Alarm memory:
If in the arming mode the alarm has gone off because of:
Opened doors, hood, trunk, additional sensor, 2
nd
- shock sensor zone
