44
3.1. Display of remote control
The two-way remote control is equipped with a colour LCD display,
which non-
stop informs the owner of the car’s status. Using various
icons the remote always provides exact information about what is
actually happening to the car.
3.2. Display icon description
Icon
Description
Alarm on/off
RFID mode on/off
Timer on/off
Turbo mode on/off
Passive Arming on/off
On – siren will beep when arming or disarming
Off – siren will not beep when arming or disarming. The siren will still be activated if the alarm is triggered or
PANIC mode is activated.
On – remote will only vibrate, when the alarm will by triggered it will beep too. Off – remote will only give
audible confirmation, when the alarm will by triggered it will vibrate too.
Shock sensor and additional sensors on/off
Alarm clock on/off
Cold Start
Ignition central door lock
AUX mode on/off
Reservation mode
This icon displays the signal strength while transmitting or receiving
Intrusion to the vehicle is detected
Valet mode
It will be displayed when the car is started or the ignition is on.
Parking lights are flashing
Displays current time, temperature inside the vehicle (F/C),, time of engine running, TURBO mode time ,
battery voltage in the car/remote
Indicates the door open
Indicates the trunk open
Indicates the hood open
Indicates remaining remote control battery life
RPS on/off
Indicates tapping on vehicle RPS
Interior temperature
Voltage display
