47
Then when turning the alarm off,
the lights will flash 4x and siren with the remote will
beep 4x.
RPS memory:
If in the arming mode RPS sensor has been
triggered, the „CALL“ symbol appears on
display at first and then a number of times
the sensor was triggered.
Shock sensor memory:
If in the arming mode shock sensor has been
activated, first the „Shoc“ symbol appears on
display and after that a number of times it
was triggered.
Auto rearming:
If you don’t open the door or turn the ignition on within 30 sec. after disarming, the alarm will
arm automatically.
Turning the siren off when alarm has been triggered:
If the alarm has been triggered and siren is hooting, press button
. The siren will stop, but
the alarm will still be armed. One more press of button
will disarm the alarm.
The system will not respond for the first few seconds after the alarm was triggered, this is
because it is still trying to send signal out to the remote during that time.
4.3. Start of vehicle
For starting of vehicle is using START button. Depending on the configuration of the vehicle
can start in different ways.
Deactivate the alarm, get into the vehicle
Procedure 1:
Press START
button
Release
button
Press START
button
Release
button
Release
button and
hit the brake
Press START
button
ACC
ON
START
ENGINE
Procedure 2:
Hit the
brake
Press START
button
Release
button
Start will take place
automatically
ACC
ON
START
ENGINE
