57
5. Alarm activation
5.1. Shock sensor trigger
If the alarm is armed and the shock sensor is triggered by a weak
impact, will be activated only first level of alarm, the siren will beep 4
times, remote starts beeping and will display the
icon 2 times and
by flash of blue backlight. If the alarm is armed and the shock sensor
is triggered by a strong impact, the alarm will go off, the siren will be
hooting for 20 sec., remote starts beeping and will display the
icon for about 9 sec and by red backlight, but it will continue flashing in 4 seconds periods
until you press any button (button
– car check function).
Press button
for cancel of alarm (siren and flashing lights off).
5.2. Additional sensor trigger
In case of additional sensor disturbance, an appropriate icon will
flash (30 sec.) with red backlight. When the alarm is over, the remote
will beep at 2 second intervals.
5.3. Theft function (door, hood or trunk trigger)
If there are opened door, hood or trunk in a car, 30 seconds alarm will go off and the remote
will be displaying the flashing icon of the door (trunk, hood) with red backlight.
Remote control will be beeping for 30 sec. and after that at 2 second intervals, until you press
any button.
5.4. Engine start blocking
When armed, the engine start is blocked. If there is an impact to the car, it will not be possible
to start the engine without disarming.
5.5. Lights on indication
If you leave the lights on after getting out of the car, after arming you will be warned of this by
a 6-second beep and by a flashing icon of lights and battery on your remote
5.6. In range display
If the remote and vehicle are within the operational range of each
other, the signal strength will be displayed beside the antenna icon
on the display
.
