63
English
3. Connect the USB cable between the ProMark3 unit and
your PC.
The first time you connect ProMark3 to the office PC,
you may be asked to install a USB driver on the PC
(although this driver should normally have been installed
when installing GNSS Solutions). This driver is located on
the GNSS Solutions CD in the “.../USB Driver/PROMARK/
” folder. Once you have inserted the CD in your CD drive,
ask the PC to search for this driver on the installation CD
and then follow the on-screen instructions to complete the
driver installation.
4. On the PC:
- From the Windows task bar, select
Start>Pro-
grams>GNSS Solutions>Tools>Download
.
(Double-click
in the right side of the window if
you want to change to the parent directory and open
another folder on your PC.)
- In the Download window, select
File>Con-
nect>Receiver>Connect via Cable
. This opens the Con-
nect Via Cable dialog.
- In this dialog, choose the port created on the PC fol-
lowing the installation of the USB driver and then click
OK
. The following appears successively in the status
bar, at the bottom of the window:
Looking for remote on COMx at xxxx Baud...
Connected to Data Source
Setting Baud rate...
Preparing for listing...
Directory has been listed
The left side of the Download window then lists the
files present in the ProMark3.
- Select the files you want to download. If necessary,
hold down the Ctrl key to make a multiple selection.
It is very important that you
connect the ProMark3 to
the PC BEFORE running
Download.
If you have some difficulty
identifying which port
number should be
selected, first run Down-
load WITHOUT the connec-
tion to ProMark3 in order
to list the available ports.
Then quit Download and
resume the operation after
connecting ProMark3. An
additional port will then
appear in the list. This
additional port is precisely
the port you need to select
to allow communication
with ProMark3.
