54
English
9. Tap the on-screen
Log
button and then walk along the tra-
jectory. The screen then looks like this:
As you are progressing along the trajectory, the content of
the
Site ID
field will be incremented by 1 at the recording
interval rate (increment: 0 to 9, then A to Z, then 0..
again, etc.).
Use the buttons at the bottom of the screen to do the fol-
lowing:
•
Pause
: Tap this button when you arrive at the end of
the trajectory. The button is then renamed “Log”. Tap
the
Log
button when you are at the start point of a new
trajectory you want to survey. Be careful not to mask
the antenna between the two trajectories.
•
Done
: Will end the kinematic survey by closing the
data file and taking you back to the last displayed nav-
igation screen. (After selecting
Done
, the receiver is
idle but still in the Surveying function.)
Quitting the Surveying Function
Press the MENU key and tap
Exit
. This takes you back to the
ProMark3 workspace screen.
Make sure the rover
antenna has the best pos-
sible view of the sky at all
times during the survey.
This should result in
#Sats
continuously greater than
4 and
PDOP
continuously
less than 4.
The
Obs. Range
field is
irrelevant to the kine-
matic mode and for this
reason is left blank.
Bold lines indicate the tra-
jectories surveyed.
Log
0001...
0015...
Log
Pause
Rover
