47
English
Base Setup and Operation
The base is setup and operated in the same way as it is in stat-
ic surveys (see
). The only difference is the use of the
initializer bar at the base station.
The base antenna should be centered and levelled above the
known point. To be able to use the initializer bar for initializa-
tion, be sure to incorporate the bar as part of the base setup
as shown opposite.
Rover Setup
Install the unit on its range pole:
1. Attach the field bracket onto the pole.
2. Place the ProMark3 receiver into the field
bracket.
3. Connect the GNSS antenna cable to the unit.
4. Mount the GNSS antenna at the end of the
base’s initializer bar.
5. Connect the other end of the antenna cable to
the rover antenna.
Allowing for kinematic ini-
tialization using Initializer
bar at the base
1.
2.
3.
4.
5.
