54
Push Enter to select a reference position. It can be your current position,
a waypoint in your list or a port from the currently loaded chart.
Push Enter again to enter the distance and the azimuth of the new
waypoint with respect to the chosen reference waypoint.
Enter the other information (name, icon, comment) just like you would for
a normal waypoint and save your waypoint by selecting
Â
using the
and then push Enter.
Example: In the example below, the waypoint MARK0006 is created as
being located 12 nautical miles and at 45 degrees from your
current position.
Deleting All Waypoints
The Delete All option allows you to delete all of your saved waypoints.
Menu
Æ
WPT Tab
Æ
4-Delete All
A confirmation message is displayed. Select Yes and push Enter to delete
all waypoints. Select No and push enter to return to the menu without
deleting them.
When using this option the *ANCHOR and *MOB waypoints are not
deleted but their coordinates are set back to 0.
Note:
You cannot select this option when waypoints are used in routes.
You must first delete all you routes before you can delete all
waypoints.
Checking the Used Waypoint Memory
The 5-Used Memory option displays the number of waypoints in the
memory. You can save up to 1000 waypoints in your list. The *ANCHOR
and *MOB waypoints are not accounted, they can be recorded even when
the 1000 waypoints maximum capacity is reached.
Note:
If you would like to free some of the memory, the list of your
waypoints can be transferred to your SD Card. See Transferring
Files To and From Your SD Card.
