47
bearing to the destination waypoint. To reach your destination waypoint,
you should navigate such that the two coincide.
Note:
You must always check to make sure there are no obstacles in the
direct line between your point of departure and your destination
waypoint.
When the deviation between your course and the bearing to follow is very
big, an arrow appears, indicating the direction in which you should travel.
Data Mode
Select the
È
icon with the
button and push Enter until the Data mode
is displayed on the screen.
In Data mode, all of the displayed information can be configured.
Select any window using the
button, push Enter and select the desired
type of information from the list. Push Enter to choose your selection.
Configurable Windows
Regardless of the display mode, the three windows on the left of the
screen can be configured.
Select any window using the
button, push Enter and select the desired
type of information from the list. Push Enter to choose your selection.
See Choosing the Information Displayed in the Configurable Window.
Active Waypoint
The name of the active waypoint is displayed at the bottom of the screen.
This can be your destination waypoint or the next waypoint in the active
route if you are navigating in GoTo Route mode.
