40
6. Moving
Toward a Waypoint and
Following a Route
The GoTo screens allow you to navigate toward a waypoint or follow a
route. There are four available display modes: Compass, 3D Road, Radar
and Data
GoTo Screen No. 1
This screen can be displayed at any time by pushing the GoTo button
once or twice. It is made up of an action bar that allows you to
activate/deactivate the GoTo function, to advance to the next waypoint in
a route, and to choose the display mode you prefer.
Example: The Compass mode screen below displays the course being
followed and the bearing to arrive at the waypoint FASTNET. The
three configurable windows on the left of the screen display your
speed, the bearing and the distance to waypoint.
Note:
If the screen that is displayed after pushing the GoTo button is
different, push the GoTo button once again.
Note:
This screen is always displayed in the mode that was last used.
Action Bar
The Action Bar displayed at the bottom of the screen allows you to:
»
/
Á
Activate / Stop the GoTo function
À
Advancing to the Next Waypoint in a Route
È
Change the display mode
Note:
An icon can only be selected if it is displayed in black (red for the
FX324 MAP Color).
