8
Mounting the Device
3.
To remove the device from the bike mount, rotate it
counterclockwise.
Installing the sensors on your bike
The cadence/speed sensor kit is used for selected models only.
1.
Follow the instruction below to install the cadence/speed sensor kit
on your bike.
2.
Ensure that the magnets are aligned with the sensing area on the
sensors.
3.
When done, you can pair the sensor with
your device by tapping
Main menu >
Settings > Sensors > Cadence/Speed
.
Note: the sensors “sleep” when not in use to
conserve battery power. They “wake up”
when they receive their usual input - the
Speed/Cadence sensor must “see” a magnet
passing it a few times to wake up.
The sensor can only be paired within a few
minutes of “waking up”, or it goes back to
sleep.
a
c
b
d
For both sensors (crank and
wheel):
Set clearance between
magnet and sensor
3-5 mm (1/8 - 3/16 inch)
