6
4.
Once your device is turned on, it will search for satellite signals
automatically. This may take several seconds depending on the
location.
When GPS is fixed, the GPS signal icon (
) on the screen indicates
the GPS status.
5.
Depending on your device model, it will also automatically scan for
heart rate monitor and cadence/speed sensor and prompt to pair them
with Cyclo.
See the following section for sensor installation and pairing.
You
can also scan the accessories manually by tapping Main menu > Settings >
Sensors.
Connecting your device to the computer
1.
Turn on the computer.
2.
Turn on your device. Connect the mini-USB end of the USB cable
to the back of your device and the other end to a USB port on your
computer.
3.
Select the desired connection type from the pop-up message
window:
•
Connect to PC:
Your device will be recogized as two external mass-
storage drives: Mgn_system and Mgn_data. You can use Windows
File Explorer to copy/move the files from the computer to your
device. A USB Connection screen appears to prevent you from
using your device.
DO
NOT delete any files that are pre-installed on the device.
Deleting the files can cause the device to crash. Magellan is not
responsible for product quality caused by file deletion.
•
Charge only:
You will be able to continue using your device with
the battery in charging mode via the computer.
For
additional information, see
page 22 Managing data on the device
.
Installing the device
Follow the instructions in this section to mount the device and the
cadence/speed sensor kit (for selected models only) on your bike. In
addition, you will need to put on the heart rate monitor during your
workouts.
Provided Mounts
Two styles of mounts may be provided for the device. These are the
forward mount and the pad-style mount. If both are included with your kit,
you may use either, or mount them on two different bikes.
Installing the Forward mount
The forward mount is sized for a 31mm bar. For a smaller bar, a shim is
required. Shims are not provided with the device.
On the side of the handlebar where you’ll install the forward mount:
1.
Remove the handgrip and brake handle
2.
Remove other items on the bar (such as shift lever) as needed.
3.
Slide the forward mount into position and make sure it fits the way
you want it.
