5
Getting started
Charging the battery
Your device has an internal battery that may not be fully charged when
you purchase it. You should charge the battery for at least 8 hours before
you start using it for the very first time.
To charge the battery:
•
Using a power socket
Plug the home charger cable into the USB connector on the back of
your device and the charger into the AC outlet.
•
Via the computer
Connect your device to the computer by using the provided USB cable.
For more information, see "Connecting your device to the computer" in
this section.
CAUTION:
For optimal performance of the lithium battery, note the following:
• Do not charge the battery where the temperature is high (e.g. in direct
sunlight).
The battery will stop charging when the ambient temperature is less than
-10ºC (14ºF) or more than 60ºC (140ºF).
• Recharge the battery when it is nearly discharged. When recharging, make
sure that the battery is fully charged. Doing so can extend the battery life.
• If you will not use the product for a long period of time (over one month)
or find the discharge/recharge time has been shortened, be sure to fully
discharge the battery first before recharging it. You are also advised to fully
discharge and recharge the battery once every 1~2 months.
• Failure to follow the battery usage instructions could cause damage to your
device, battery and even bodily injury or property damage and will void the
warranty.
Performing the initial start-up
1.
Mount the device and accessories on to your bike. For more
information, see the “Installing the device” section.
2.
Press and hold the POWER button for 3 seconds to turn your device
on.
3.
Follow the prompts to personalize your device, including:
•
Select your preferred language.
•
Set the date and time.
•
Set the units format.
•
Create your user profile.
Note:
You can change these settings later by tapping Main menu > Settings.
