SIGMA LASER STENT AND TUBE CUTTER
990-401
vii
Never
expose eyes or skin to laser irradiation.
Exposure to direct or scattered laser light is extremely hazardous.
Direct exposure of the eye to laser beams may result in blindness.
WARNING
Wear protective glasses.
Be sure to wear protective glasses while using the Tube Cutter. Even with eye protection,
you may lose your sight if you look directly at the laser beam.
Do
not
expose your skin to the laser beam.
Your skin may be severely burned.
Do
not
touch any processed part during, or immediately after processing, the parts
may be
very hot
.
Use only specified cables.
A cable with insufficient capacity or loose connections can cause electric shock or fire.
Do
not
use a damaged power cable, connecting cables, or plugs.
Do
not
step on, twist, or tense any power cable. The power cable and connecting cables
may be damaged which can cause electric shock, short circuit, or fire. If any part needs to be
repaired or replaced, consult Amada Miyachi America or your distributor.
Stop operation
if any trouble occurs.
If you detect a burning smell, abnormal sounds, abnormal heat, smoke, etc. from the Tube
Cutter, turn the power OFF
immediately
to prevent fire or electric shock. Contact Amada
Miyachi America or your distributor for help.
Ground the Tube Cutter.
If the Tube Cutter is not grounded, you may get an electric shock when there is trouble or if
electricity leaks through the protective insulation.
Use a stopper plug.
Laser beams are dangerous to the human body. Prevent accidental leakage of the laser
beam by using a stopper (a heat-resistant, laser beam absorbing material).
People with pacemakers
MUST
stay away from the Tube Cutter.
When the Tube Cutter is operating, it generates a magnetic field, which adversely affects
pacemakers. People who use a pacemaker must
not
approach the Tube Cutter, or walk
around the laser shop while the Tube Cutter is operating,
unless
their medical doctor has
deemed it safe to do so.
