214075
76
Revision A
Figure 8.20: Drive Pulley
4.
Tighten the three M10 bolts while maintaining
11 mm (7/16 in.) dimension (E) between pulley (A) and
gearbox (F). Torque bolts to 34–39 Nm (25–29 ft·lbf).
Figure 8.21: Tensioner
5.
Position tensioner assembly (A) as shown, and secure
with M16 x 120 bolt (B) and nut (C). Torque nut (C) to
47–54 Nm (35–40 ft∙lbf).
Figure 8.22: Tensioner
6.
Install spring (A) into forward hole (B) in frame.
7.
Install eyebolt (C) onto tensioner (D) and spring (A).
Secure eyebolt with hardened washer (E) and two M10
nuts (F).
NOTE:
Install conditioner drive belt after reattaching header to
adapter.
