214075
53
Revision A
Figure 7.5: Conditioner Drive
NOTE:
When setting roll timing, ensure the grease fittings (F) on
both drivelines face towards the rear simultaneously.
2.
Secure bottom roll (A).
3.
Manually rotate the upper roll (B) in a counterclockwise
direction until it stops.
4.
Make a mark (C) across the yoke (D) and gearbox
flange (E).
Figure 7.6: Conditioner Drive
5.
Manually rotate upper roll (A) in a clockwise direction
until it stops. Make a second mark (B) on the yoke
flange, and align it with the mark on the gearbox flange.
