214075
9
Revision A
2.3
Removing Shipping Stands
NOTE:
This procedure must be completed on both sides of the header.
Figure 2.11: Shipping Stands (Right Side Shown
– Left Side Opposite)
1.
Remove bolts (A).
2.
Remove bolt (B).
Figure 2.12: Shipping Stands (Right Side
Shown – Left Side Opposite)
3.
Cut any shipping wire from the legs of the header.
4.
Remove hair pin (A) from clevis pin (B).
5.
Hold shipping stand (C) and remove clevis pin (B).
6.
Remove stand (C) and discard. Reinsert pin (B) in
header lifting arm and secure with hair pin (A).
Figure 2.13: Shipping Hook
7.
Remove hooks (A) at front corners and
reinstall hardware.
NOTE:
If tall crop divider option will be installed, do not reinstall
hardware.
