214075
28
Revision A
Figure 3.40: Header Float Linkage
13. Remove clevis pin from storage position (B) in linkage
and insert into hole (A) to engage float springs. Secure
with hairpin.
Figure 3.41: Safety Prop
14. Disengage safety prop by turning lever (A) downwards
to release and lower stop until lever locks into
vertical position.
15. Repeat for opposite safety prop.
CAUTION
Check to be sure all bystanders have cleared the area.
Figure 3.42: Ground Speed Lever
16. Start the engine and activate the HEADER DOWN
switch (A) on the GSL to fully lower the header.
17. Stop engine and remove key from ignition.
