![background image](http://html2.mh-extra.com/html/macdon/r113/r113_unloading-and-assembly-instructions_3209203012.webp)
214075
6
Revision A
Figure 2.7: Skid Shoe Supported (Left Side
Shown)
9.
Remove the wire (A) that is holding skid shoe (B).
Figure 2.8: Skid Shoe (Left Side Shown)
10. Tilt skid shoe (B) inward, and align link (A) with
mounting hole in skid shoe.
11. Install bolt (C), washer, and nut.
12. Push the skid shoe towards the header, and tighten nut.
13. Repeat previous four steps for opposite side.