UNLOADING AND ASSEMBLY
169558
18
Revision D
STEP 5. INSTALL STEPS
a. Remove two bolts securing steps to platform,
and remove steps.
b. Remove the one existing upper bolt.
c. Re-install one bolt in lower hole in platform. Do
NOT
thread in fully.
d. Hang step assembly on bolts. If required, back
off bolts.
e. Install two remaining bolts in upper holes in step.
f. Tighten
hardware.
STEP 6. UNPACK IGNITION KEYS
a. Remove wing nut (A) from fuse box cover (B),
and remove cover.
b. Remove tape and keys (C) from inside cover
(B). Discard tape.
c. Unlock cab doors, and place key on console.
d. Close cab doors.
e. Re-install cover (B) with wing nut (A).
B
A
C
B
