PRE-DELIVERY CHECKS
169558
40
Revision D
E. AIR CLEANER
a. Check that air cleaner cap is firmly attached,
and that all clamps on air cleaner are secure.
b. Check spring clamps (A) on charge air cooling
duct connections (at turbocharger outlet, engine
intake, and inside cooling box).
F. HYDRAULIC OIL LEVEL
a. Turn filler cap counterclockwise to loosen bung,
and remove dipstick.
b. Check that level is between LOW and FULL
marks.
c. Re-install filler cap, and turn clockwise to tighten
bung.
G. FUEL SEPARATOR
a. Turn drain valve by hand 1-1/2 to 2 turns
counterclockwise until draining occurs.
b. Drain the filter sump of water and sediment until
clear fuel is visible. Clean as necessary.
c. Turn the valve clockwise to close the drain.
HOLD 0.018 in. (0.46 mm) GAUGE BETWEEN
MIDDLE COILS AND TIGHTEN CLAMP UNTIL
GAUGE IS SNUG. REMOVE GAUGE.
A
A
