UNLOADING AND ASSEMBLY
169558
28
Revision D
B. A-SERIES HEADER
a. Remove hairpin from pin (A), and remove pin
from left and right header boots (B) on header.
IMPORTANT
To prevent damage to the lift system
when lowering header lift linkages
without a header or weight box
attached to windrower, ensure that
float engagement pin is installed in
storage location (C), and
NOT
installed at hole location (D).
IMPORTANT
For machines equipped with the hydraulic
center-link, it may contact the header as
the windrower approaches the header for
hook-up.
b. If necessary, re-locate the pin (E) at the frame
linkage as required to raise the center-link (F) so
that the hook (G) is above the attachment pin on
the header.
CAUTION
Check to be sure all bystanders have
cleared the area.
c. Start the engine, and activate HEADER DOWN
button on the Ground Speed Lever (GSL) to fully
retract header lift cylinders.
(continued next page)
B
A
HEADER UP
HEADER TILT UP
HEADER DOWN
HEADER
TILT DOWN
D
C
E
G
F
E