![background image](http://html.mh-extra.com/html/macdon/m1-series/m1-series_unloading-and-assembly-instructions_685709061.webp)
215620
49
Revision A
$
%
Figure 3.10: Hydraulic Hose Bundle
7.
Move the wheel leg into position next to the windrower
and feed hydraulic hose and electrical bundle (A) into
frame (B).
$
Figure 3.11: Hydraulic and Electrical Bundle
8.
Feed bundle (A) through the hole below the windrower at
the center of the frame.
$
%
&
'
Figure 3.12: Leg Position on Frame
9.
Insert the leg into the frame and line up with exposed
hole (A).
10. Insert the pins and secure leg with long bolts (B), two caps
per pin (C), and nuts (D). Torque to 136 Nm (100 lbf·ft).
NOTE:
If necessary, use a pry bar to align holes.
11. Repeat for the opposite wheel leg.