215620
89
Revision A
$
%
&
'
)
)
Figure 3.99: Three Ballast Kits Installed
–
489 kg
(1080 lb.)
NOTE:
When all three sets of weights are installed, no spacers are
required.
$
%
Figure 3.100: Engine Compartment Hood
9.
Move latch (A) towards the right cab-forward side of the
windrower.
10. Grasp louver (B), and lift the hood to open it.
$
&
%
(
'
Figure 3.101: Rear Light Bezel with Ballast Kit(s)
Installed
11. Bring left bezel (A) close to the frame and connect plug
P215 to the back of red tail/brake light (E).
12. Loosely attach left bezel (A) to the frame with four hex
flange bolts (B).
13. Repeat Step
and Step
, attaching
plug P210 at right bezel (C).
14. Turn the IGNITION key to the RUN position, and ensure that
rear swath lights (D) and red tail/brake lights (E) are
working.
15. If the lights are working, tighten hex flange bolts (B) to
secure the left and right light bezels.
IMPORTANT:
Ensure that rear swath lights (D) are centered in the
light bezel.
